multiOTP open source Raspberry Pi image ready to use
multiOTP open source is a strong two-factor authentication device
(c) 2010-2023 SysCo systemes de communication sa
Current build: 126.96.36.199 (2023-01-19)
Check the readme file of the multiOTP open source edition for more information.
Raspberry Pi configuration
Supported Raspberry Pi hardware: 1B/1B+/2B/3B/3B+/4B
Nano-computer name: multiotp
IP address: 192.168.1.44 (netmask: 255.255.255.0, default gateway: 192.168.1.1)
Flashing the binary image of multiOTP open source Raspberry Pi edition
To flash the binary image, you need a microSD card with a capacity of at least 4GB.
You can use Etcher to flash the image: https://www.balena.io/etcher/ (Windows / MacOS / Linux)
multiOTP open source Raspberry Pi edition configuration
Admin URL: http://192.168.1.44 (netmask: 255.255.255.0, default gateway: 192.168.1.1)
Radius password: myfirstpass (for subnet 192.168.0.0/16)
This package is the result of a *bunch* of work. If you are happy using this
package, [Donation] are always welcome to support this project.
Please check https://www.multiotp.net/ and you will find the magic button ;-)
If you want to install a battery backed up Real Time Clock in your
Raspberry Pi, the drivers for these models are included in the package:
The Raspberry Pi image of multiOTP open source is provided "as is", without
warranty of any kind, express or implied, including but not limited to the
warranties of merchantability, fitness for a particular purpose and non
infringement. in no event shall the authors or copyright holders be liable for
any claim, damages or other liability, whether in an action of contract, tort
or otherwise, arising from, out of or in connection with the software or the
use or other dealings in the software.